Pump size for a house

Support forum for sizing well pumps, water pumps, and complete systems.

Pump size for a house

Postby lwparchive » Tue Nov 06, 2012 11:58 am

Pump System that is currently installed is a Gould's J04853L/J5SH/V250, we would like to replace this with a more efficient system.

The house has 3 stories, 3 full bathrooms, 1 half Bathroom. The master bathroom has 2 shower heads. It has 3/4" copper piping for most of the lines. The Master Bathroom is furthest from pump.

The present pump is fed by an underground pump that outputs about ~5 -10 GPM.

The pressure with the present system is very poor if two bathrooms are in use and/or wash machine, etc.

Please let us know about a system that would make it more efficient. Please also gives the cost of system with all part needed for the upgrade.

Thanks,

Richard.-
lwparchive
Member
 
Posts: 385
Joined: Mon Nov 05, 2012 4:20 pm

Re: Pump size for a house

Postby dlamp67 » Thu Dec 20, 2012 1:54 pm

You might want to look at the Aqua Boost system. The biggest issue is that the pump must a have a constant flooded suction. At the same time, you will need to make sure your well pump can keep up with new pump. this system will definitely deliver a higher output pressure.

http://www.lockewell.com/index.php?main ... cts_id=370
dlamp67
Professional
 
Posts: 275
Joined: Mon Jul 30, 2012 1:46 pm


Return to Well & Water Pump Sizing

Who is online

Users browsing this forum: No registered users and 2 guests

cron