Page 1 of 1

Grinder pump replacement

PostPosted: Tue Nov 06, 2012 4:37 pm
by lwparchive
I have a customer with a lift station with 2 2 hp, 15 amp, 3450 rpm, 208/230 v, 1 phase grinder pumps (model RGS2012).

I would like to replace these pumps with something comparable (not sure they need to be a grinder pumps).

The lift station is about 15 ft deep.

What do you suggest?

Re: Grinder pump replacement

PostPosted: Tue Mar 26, 2013 4:15 pm
by dlamp67
You may look at the Gould's WS series pumps. These a 2" solids handling pumps and will provide more GPM than the RGS2012.

http://www.lockewell.com/index.php?main ... =1_3_9_162