Page 1 of 1

Stenner not pumping

PostPosted: Tue Nov 06, 2012 12:04 pm
by lwparchive
Hi I was looking at some of your pump parts on eBay, I have a Stenner chlorine injector on my water well,but it has stop injecting the chlorine, the pump motor turns fine, all the lines are good, I changed the duck bill valve but still will not work. My question is, do the tubes in the pump go bad, because mine looks fine but I don't know what else to change. Any help will be appreciated.
Thanks jay

Re: Stenner not pumping

PostPosted: Wed Feb 06, 2013 4:21 pm
by dcohan
Yes pump tubes go bad. tubes should be changed yearly along with the duckbill in the ejector.