Page 1 of 1

Replaced motor and pressure switch

PostPosted: Tue Nov 06, 2012 12:14 pm
by lwparchive
The problem started with the pressure switch would not shut off. The motor has been replaced as well as the pressure switch and it still not not shut off. What else could be the problem.

Barbara

Re: Replaced motor and pressure switch

PostPosted: Fri Nov 30, 2012 4:10 pm
by dlamp67
This issue can be caused by lack of water, sucking air or the pump is wore out. I would call our office and talk to one of our technical reps and see if they can determine a cause.