Unidose pressure cut off problem
Posted: Mon Nov 05, 2012 4:28 pmI installed a 12 gpd unit rated at 80 psi. it is hooked into the discharge
main headed to the irrigation zone valves . the system pump cuts off at 62
psi but when a zone is running it is often at 45-50psi. the uni dose unit
doesn't seem to overcome the lower line pressure It does pump but i'm
thinking without enough pressure. What should I do?
Robert W.
main headed to the irrigation zone valves . the system pump cuts off at 62
psi but when a zone is running it is often at 45-50psi. the uni dose unit
doesn't seem to overcome the lower line pressure It does pump but i'm
thinking without enough pressure. What should I do?
Robert W.