GT20 Irrigation Pump

Support forum for sizing well pumps, water pumps, and complete systems.

GT20 Irrigation Pump

Postby lwparchive » Tue Nov 06, 2012 10:55 am

Hello,

I am interested in a Gould's GT20 pump.

One circuit of our sprinkler system has six, 5 gallon per minute nozzles in its geared rotary heads running off of 1" or 1-1/4" pipe. The other circuits have as many as ten, Champion pop-up brass heads (that I cannot
find a flow rate for) running off of 1" (I believe) underground pipe. I
am pumping water from a lake, so there will occasionally be some sand and/or slight debris, and have about 15 feet of total head (combined suction add discharge). Would this be a suitable pump for me to use?

There is presently a 2" pipe in place on the supply side that I plan to bush down to 1 -1/2" should I get the Gould GT20, and 1-1/2" pipe on the discharge side. Do you see a problem using a reducing bushing?

Regards,

Michael Miller
lwparchive
Member
 
Posts: 385
Joined: Mon Nov 05, 2012 4:20 pm

Re: GT20 Irrigation Pump

Postby dlamp67 » Thu Dec 20, 2012 2:00 pm

I don't see a problem with the GT20. Using a bushing will not hinder the performance of the pump.
dlamp67
Professional
 
Posts: 275
Joined: Mon Jul 30, 2012 1:46 pm


Return to Well & Water Pump Sizing

Who is online

Users browsing this forum: No registered users and 0 guests