LTH7 - Pulsatron Plus ET Series Metering Pump

240 Gallons per day - 10.0 gph - 35 psi - with Integrated Controller

The Pulsatron Plus Series ET was designed to feed chemical in response to a water meter input. When the count exceeds a set value (either 1 or 10), the pump starts. The pump will continue to run for an adjustable time period. The Series ET includes both input and output water meter connections at the front panel. The output connection provides an isolated dry contact output of the water meter contact to operate additional pumps or timers off the same water meter. Typical applications include inhibitor feed for an open air-cooling tower. The Series ET provides everything you need in one unique, compact package to create a simple and cost effective metering system.

Fourteen distinct models are available, having pressure capabilities to 250 PSIG (17 BAR) @ 5 GPD (0.8 lph), and flow capacities to 504 GPD (79.5 lph) @ 20 PSIG (1.3 BAR), with a turndown ratios up to 100:1. Metering performance is reproducible to within ± 2% of maximum capacity.

OPERATING BENEFITS

• Reliable metering performance.
• Rated hotfor continuous duty.
• Leak-free, sealless, liquid end.

FEATURES

• Complete Timer Control in one unique package.
• Simple 'Mode Select' knob, Stroke Length, Stroke Rate.
• Two Selectable Time Base Settings.
• Water Meter Input. Activate pump on 1 or 10 counts.
• Isolated Dry Contact Water Meter Output.
• Isolated from Earth Ground.

CONTROLS

• Manual Stroke Rate: Turn-Down Ratio 10:1
• Manual Stroke Length: Turn-Down Ratio 10:1
• Time Range: 2 to 200 seconds or 12 seconds to 20 minutes
• Time Percent: 1 to 100%
• Water Meter Input and Output: Isolated dry contact

AFTERMARKET

• KOPkits
• Gauges
• Dampeners
• Pressure Relief Valves
• Tanks
• Pre-Engineered Systems
• Process Controllers (PULSAblue, MicroVision)