LC64 - Pulsatron Plus T7 Series Metering Pump

30 Gallons per day - 1.25 gph - 100 psi - with Integrated Controller

The Pulsatron Plus Series T7 was designed to feed chemical products on a timed schedule. Typical applications include the feed of biocides in open-aircooling towers. The feed cycle is initiated and controlled by the programmable timer. The Series T7 provides everything you need in one unique, compact package to create a simple and cost effective metering system for timed applications.

A 7-day programmable timer controls the Series T7. The timer is programmable in 1-minute increments with up to 8 on/off cycles per day. Each timed event can be set to run any day of the week on a 7-day cycle.Other control features include a standby mode, continuous ON mode and the ability to adjust the stroke length from 0 to 100%.

Four distinct models are available, having pressure capabilities to 100 PSIG (7.0 BAR) @ 12 GPD (1.9 lph), and flow capabilities to 48 GPD (7.6 lph) @ 50 PSIG (3.3 BAR), with a turndown ratio of 10:1. Metering performance is reproducible to within ± 3% of maximum capacity.

OPERATING BENEFITS

• Reliable metering performance.
• Rated hotfor continuous duty.
• High viscosity capability.
• Leak-free, sealless, liquid end.

FEATURES

• Complete Timer Control in one unique package.
• Solid State 7 Day Electronic Timer.
• Isolated from Earth Ground.
• Few Moving Parts and Wall Mountable.
• Safe & Easy Priming with durable leak-free bleed valve assembly (standard).

CONTROLS

• 7 Day Programmable Timer:
  • Program up to 8 On/Off Events Per Day
  • Timed Events Can Be Set To Run Any Day Of The Week In A 7-Day Cycle.
• Manual Stroke Length: Turn-Down Ratio 10:1

AFTERMARKET

• KOPkits
• Gauges
• Dampeners
• Pressure Relief Valves
• Tanks
• Pre-Engineered Systems
• Process Controllers (PULSAblue, MicroVision)